![1891 argentine mauser firing pin bolt face 1891 argentine mauser firing pin bolt face](http://www.hoosiergunworks.com/images/fp_48_conversion.jpg)
#1891 ARGENTINE MAUSER FIRING PIN BOLT FACE DRIVER#
Swing bolt release lever on left side of receiver and remove the bolt.Ĥ) Figure 4 shows the bolt sleeve lock on the bolt sleeve.ħ) After completely unscrewing the bolt sleeve from the bolt body, remove from the bolt body.Ĩ) Using a small screw driver lift the extractor out of the groove and rotate clockwise.ĩ) Slide the extractor forward and off of the bolt body.ġ0) Place firing pin into the bolt disassembly disc in rifle stock.ġ1) Compress the bolt sleeve until the cocking sleeve clears and can be turned in either direction.ġ2) Turn cocking sleeve 1/4 turn in either direction.ġ3) Remove cocking sleeve and set aside. Pull the bolt to the rear of the receiver and then close the bolt.Ģ) Rotate the safety to the middle and upright position.ģ) Pull the bolt to the rear of the receiver.
![1891 argentine mauser firing pin bolt face 1891 argentine mauser firing pin bolt face](https://thisoldrifle.com/argentine1891/boltdisassembly/graphics/l/title.jpg)
1) With the rifle pointed in a safe direction, open the bolt and make sure the rifle is not loaded.